This modification makes adjusting the landing gear a "Snap" (pun intended).  I mounted the "Snaps" spring loaded landing gear pins on the left side of each jack (looking AFT) and mounted the handle on the right side of each leg.  It is a simple operation to pull the pin with my left hand and raise or lower the landing gear with my right hand, and then secure with the "Snaps" pin.

Bottom: Landing Gear Handle Made From: 3/8" x 3-1/2" Carriage Bolt, 1 washer and 1 standard nut on the outside of the leg and 1 washer and 1 elastic stop nut (inside leg), 3/8" ID plastic tubing to cover threads.  Click picture for close-up.

---