Mopar Tow Vehicle Wiring Harness
for 2007-2010 Jeep Wrangler

P/N 82211156AB: This wiring harness connects the Wrangler to the towing vehicles 7 way trailer connector. Includes a underhood wiring disconnect and is engineered to work with your Wranglers body computer. Operates the Wranglers taillights.

This harness makes for a very clean wiring system for operating the Jeep Wrangler tail/turn/brake lights when towing the Jeep behind a motor home or other vehicle.  It eliminates the need to add additional light bulbs, diodes, wire splices, etc. and is an authorized modification by Jeep.  This harness can be purchased from your local Jeep dealer by P/N 82211156AB or from Mopar online at the link below.

Link to Mopar Website Select 2007-2010 Wrangler (2-Door or 4-Door), Carriers & Cargo Hauling, Hitches and Towing, Tow Vehicle Wiring Harness

Installation Tip:  To gain access to the connector in the Wrangler that this harness is connected to, follow the Installation Guide to remove the glove box, and then remove the right side speaker box.  Also, instead of using the four-way plastic connector for connecting the Jeep to the tow vehicle, I wired the harness into a conventional 6-pin circular tow vehicle connector.

Wiring Diagram for my Jeep Installation