Pictures of the in-bed 7-pin trailer connector. 
You can view a 1024x768 high-res image of most of the pictures by clicking on the picture.


This is the package for the Reese "T Connector". 
Camping World SKU is 26693


Typical 7-Pin in-bed connector with harness


Reese P/N 15381 "T Connector" before modification.


Reese P/N 15381 "T Connector" after modification.


Raychem aviation splice used for splicing wires. 
The splice is cripmped with a Raychem crimper and then the sleeve is heat
shrinked around the splice, making a water-tight splice.  Automotive splices are acceptable also.


Close-Up view of RayChem Splices Installed


Modified "T Connector" cable wrapped and ready for installation.


Closeup of modified "T Connector" cable wrapped and ready for installation.


Harness installed  in truck.  Note that rear bumper is at the bottom of the picture.


Close-Up view of truck wiring harness 10-Pin connector
Top row pins are numbered 1-5, left to right (Red is pin 4)
Bottom row pins are numbered 6-10 left to right (Yel is pin 10)


Completed Installlation of 7-Pin plug in truck bed.

[Back to Instructions]